|
These surgical stainless steel bone cutting and removal instruments
are of the same shape as the implant. These drills cut the
bone hole for the specific size implant that they match: 3.5mm,
4.0mm and 4.5mm. The partial rings (they will appear complete
as the drill rotates) on the cutting surface of each of the
drills denotes the depth or length of the cut into the bone
i.e., 11, 13, and 15mms which will correspond to the three
lengths of implants currently available from B.A.S.I.C. These
drills feature contra-angle with latch attachment, cooling
flutes, internal irrigation capabilities, and should be rotated
slowly down the pilot hole pathway (400 RPM) in an up and
down manner with copious amounts of irrigation solution for
cooling and debris removal.
|
Osteotomy
Drill(s)
|
